SpeedyBee F405 WING APP Flight Controller

The SpeedyBee F405 WING APP Flight Controller features an upgraded sensor for enhanced precision and navigation. It supports multiple fixed-wing planes with up to 11 PWM outputs and offers dual firmware options: INAV and Ardupilot for tailored flight experiences. Configuration is streamlined through the Speedybee and QGroundcontrol apps for a wireless and efficient setup.

• Upgraded Sensor: Beyond the traditional consumer IMUs, this controller offers reduced noise and improved temperature stability combined with a centralized IMU for accurate navigation and adjustments.
• Seamless Configuration: The BOOT button provides easy configuration, allowing for firmware flashing, light color changes, and wireless mode switching. Additionally, the buzzer mute switch ensures a quiet setup process.
• Battery Monitoring: The 4-level LED battery indicator facilitates quick battery level checks, making separate LiPo checkers unnecessary. Additionally, the precision current sensor is optimized for monitoring low current ranges, particularly those below 10A.
• LED Features: Four LED strip plugs enhance visibility and aesthetics in the sky, with the BOOT button simplifying the management of lighting effects.
  Telemetry & Receivers: The controller is designed for straightforward integration with ELRS/TBS receivers, delivering telemetry data through OpenTX/EdgeTX platforms for real-time monitoring.
• Flight Modes & Versatility: Support for various flight modes, including Tiltrotor and Quadplane, is integrated. With its 11 PWM outputs, it’s adaptable to a diverse range of fixed-wing planes.
• Firmware Choices: Choose between the INAV and Ardupilot firmware based on your flight needs, whether straightforward FPV flight or more advanced functionalities.
• Connection Options: The controller promotes a user-friendly approach with plug-and-play connectors for elements like digital VTX, receivers, cameras, and more. Those who prefer soldering also find it accommodating. Multiple connection channels, including BLE, Wi-Fi, and classic Bluetooth, ensure flexibility in setup and monitoring.

Stay ahead with wireless configuration capabilities via the Speedybee and QGroundcontrol apps, promoting a hassle-free and cable-free setup experience.

SpeedyBee F405 WING FC board

• MCU: STM32F405, 168MHz, 1MB Flash
• IMU (Gyro & Accelerometer): ICM-42688-P
• Barometer: SPL006-001
• OSD Chip: AT7456E
• Blackbox: MicroSD Card Slot
• UART: 6 sets, specific for various functions including wireless board telemetry connection
• I2C: Used for magnetometer, digital airspeed sensor
• ADC: 4 types (VBAT, Current, RSSI, Analog AirSpeed)
• PWM: 12 types (11 regular and 1 “LED” pad)
• ELRS/CRSF receiver: Supported, connected to UART1
• SBUS: Built-in inverter for SBUS input (UART2-RX)
• LED: 3 for FC STATUS and 1 RGB
• RSSI: Supported, named as RS
• Supported FC Firmware: INAV and ArduPilot for SpeedyBeeF405WING
• Weight: 8.9g

SpeedyBee F405 WING PDB board

• Input voltage range: 736V (26S LiPo)
• Battery Voltage Sensor: Connects to FC board VBAT
• Battery Current Sensor: 90A continuous, 215A peak connection to FC board
• TVS Protective diode: Included
• FC BEC output: Designed for multiple components, including FC, Receiver, and GPS module
• VTX BEC output: Designed for video transmitter and camera
• Servo BEC output: Designed for servos
• Weight: 11.4g

SpeedyBee F405 WING Wireless board

• Wireless Configuration: Multiple modes, including BLE, Wi-Fi, and Classic Bluetooth SPP
• LED strip controller: 4x WS2812 LED strip connectors
• On-board battery level indicator: 4x RGB LED for battery level display
• Weight: 4.2g

• 1 x F405 WING FC board
• 1 x F405 WING PDB board
• 1 x F405 WING Wireless board
• 1 x F405 WING USB extender
• 1 x 90 Degree pin Header(3×12)
• 3 x straight pin header(1×12)
• 0 x M2x4 small head cross screw
• 1 x White straight pin header(1×4)
• 5 x M2 x 12 copper Standoff Spacer
• 5 x M3x4 mm Silicone Grommets
• 1 x 8pin SH1.0 USB extender Cable (80mm)
• 1 x 4pin SH1.0 Analog VTX Cable (250mm)
• 1 x 6pin SH1.0 GPS Module Cable without Connector on another end (250mm)
• 1 x 6pin Digital VTX Cable (250mm)
• 1 x 4pin SH1.0 to 3+2pin JST1.25 FPV Cam Cable(250mm)
• 1 x 6pin GH1.25 Telemetry module Cable(200mm)
• 1 x 4pin Dupont single-head Cable(150mm)
• 1 x Double-sided tape for isolating pins and cables(32x9x1mm)

Click here to view more Flight controller from our store