SkyStars F7 HD Pro 2 + KO45 3-6S BLHeli_32 4-in-1 ESC 30×30 Fly Tower Stack
The Skystars F7+ KO45 Blheli_32 Fly Tower Stack features the SkyStars F7 HD flight controller, as well as the KO45 45A 4-in-1 ESC to give your multirotor full power!
Note: There is no difference in appearance between the 60A and 45A ESC, which can be distinguished from the MOS tube.
SkyStars KO45 45A BLHELI_32 4-in-1 30X30 ESC
Excellent over-current capability
By adopting the best PCB material and PCB production process. Such as the application of high TG materials, 3oz copper PCB & 2μm gold deposition process on PCB. Together with a 6-layer layout design of the board, compared with others that commonly use 4 layers, allowing it to withstand higher current.
Extreme stability and support of 6S LiPo battery
By use of 24 pcs of new Toshiba standard 40V 5×6 Mosfet & electronics imported from USA and Japan. Plus advanced lead-free SMT Processing technology. It makes ESC fully support the 6s battery and get better performance.
Better Control Performance
Flashed with the latest BLHeli_32 firmware in factory, support telemetry functions (including voltage, RPMS, & current )
F722 HD PRO2 FC
- Receiver: Support Sbus, crsf, ibus, Spektrum 1024/2048, SBUS, XBUS, SumD and SumH RX. Built-in inverter, support 3.3v spectrum satellite receiver, support PPM receiver. The default receiver input is UART 1, the F7 has a built in inverter that can be used in any free UART.
- LED: 4 independent LED pads, support WS2812 programming
- Mounting Holes: Standard 30.5mm square to center of holes
- Item name: F722HD Pro 2 Betaflight Flight Controller
- OSD: Betaflight OSD & DJI HD OSD (UART6)
- Input Voltage: 3-6S LiPo(11.1V~22.2V)
- 6 Hardware UARTS (UART123456)
- MCU: STM32F722RGT6 216MHz
- Firmware: SKYSTARS F7HD
- Dimensions: 38.5x40x6.2mm
- USB connection: USB-C
- IMU: MPU6000 (SPI)
- BEC 5V 3A & 10V 3A
- Buzzer Pad: YES
- Black box: 16MB
- CURR pad: YES
- RSSI Pad: YES
- Weight: 6.8g
- 1 x SkyStars F7 F722 Flight Controller
- 1 x SkyStars RC KO60 60A BLHELI_32 4-in-1 30X30 ESC
- 1x Connecting Cable
- 1x XT60 Connector
- 1x Capacitor