Features

• Supports telemetry functions (including Voltage, RPMS, & Current)
• Toshiba standard 40V 5×6 Mosfet & electronics
• Lead-free SMT Processing technology
• ESC Onboard Current Sensor
• Over-Current Capabilities
• Supports 6S Batteries
• 6-layer Layout Design
• BLHeli_32 Firmware

Specifications

Skystars H743 Singel Gyro FC Specifications
– MCU: STM32H743VIT6, 480MHz , 1MB RAM, 2MB Flash
– Gyro: BMI270
– Baro: BMP280
– OSD: AT7456E
– Blackbox: 16M
– 8x Uarts (1,2,3,4,6,7,8) with built-in inversion.
– 8x PWM outputs
– 1x I2C
– 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
– USB Type-C(USB2.0)
– 2x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr)
– 1x JST-SH1.0_6pin connector (R1/G/R6/T6/G/10V)
– Dual Camera Inputs switch
– VTX 10V/Vbat filtered power ON/OFF switch
– DJI FPV OSD is supported by any spare UART
– Mounting: 30.5 x 30.5mm
– Dimensions: 39.5 x 39.5 x 7.8 mm
– Weight: 10.1g

KO60 – 60A

• Drive signal: Dshot300-1200 / Proshot1000 / Oneshot / Multishot / PWM
• Peak current [5 seconds]: 65A
• Mount: 30.5mm x 30.5mm
• Continuous current: 60A
• Firmware: BLHeli_32
• ESC weight: 12g
• Supports 3-6S
• BEC: No