MAMBA MK4 F722 Mini F55_128K Flight Controller Stack

MAMBA MK4 F722 Mini F55_128K Flight Controller Stack

Diatone’s Mamba MK4 (fourth generation) stack is a redesign of its already fantastic line of flight controllers and ESCs. Improvements include making the products easier to use by increasing soldering pad sizes by 30%, pad spacing by 100%, adding USB-C, additional UARTS and I2C, better filtered BEC, ESC support for 128K PWM, WiFi config through the Speedy Bee App, and more.

Out of stock

10,499

Orders placed before are shipped on same day

Out of stock

Diatone’s Mamba MK4 (fourth generation) stack is a redesign of its already fantastic line of flight controllers and ESCs. Improvements include making the products easier to use by increasing soldering pad sizes by 30%, pad spacing by 100%, adding USB-C, additional UARTS and I2C, better filtered BEC, ESC support for 128K PWM, WiFi config through the Speedy Bee App, and more.

What’s New?

A completely different pad style has been redesigned to increase pad area by 30% and pad spacing by 100%, reducing solder errors and associated failures.

  • The pad area increased by 30%
  • Pad spacing increased by 100%
  • MP9943 synchronous rectifier BEC
  • MINI series upgrade DJI interface and 5v 15W/9V 18W 2 set BEC
  • USB Type C
  • 6 Set UART and I2C
  • 4 Set Power Protection
  • 32Bit ESC all support 128K
  • Mini series FC uses 2mm and 3mm mounting holes, special dampening ring
  • Upgrade the twisted pair anti-jamming cable and reinforcement process

Specifications:

F722 MINI MK4 FLIGHT CONTROLLER

  • MCU: STM32F722
  • Frequency: 216MHz
  • Gyro: Gyro ICM42688P
  • Barometer: SPL06
  • OSD: AT 7456E
  • Blackbox: 16M Memory
  • Barometer: Yes
  • UARTS: 6 Sets
  • I2C: Yes
  • F.Port: Yes
  • Buzzer: Yes
  • Current: Yes
  • ESC Signal: 8 Sets
  • BEC 3.3V: 0.5A
  • BEC 5V: 2.5A
  • BEC 9V: 2A
  • MB LED: Yes
  • BF LED: Yes
  • Air Unit Port: Yes
  • VTX Switch: Yes
  • BEC Protection: Yes
  • Receiver Protection: Yes
  • TVS Protection: Yes
  • Input: 6S LiPo
  • Firmware: Betaflight
  • Mounting: 20.0×20.0mm,M3/M2
  • Size: 29.0×29.5×6.5mm
  • Weight: 6.0g

F55_128K BL32 MINI 4-IN-1 ESC

  • Input Voltage:  3~6S LiPo (12.6V ~ 25.2V)
  • Continuous Current:  55Ax4
  • Burst Current:  65A (10S)
  • BEC:  No
  • Target:  BLHeli_32 MAMBA F55_128K MINI
  • SOFT:  DShot300/600/1200
  • PWM:  24~128K
  • TVS Protection:  Yes
  • Mounting Size:  20x20mm, M2/M3
  • Dimensions:  43.5×31.0x6.0mm

Diatone Mamba MK4 Mini
Diatone Mamba MK4 Mini
Diatone Mamba MK4 Mini
Includes:
1x Diatone Mamba MK4 F722 Mini Flight Controller
1x Diatone Mamba F55_128K BL32 Mini 4-In-1 65A ESC
5x M2 Silicone Grommets
5x M3 Silicone Grommets
5x M2 ESC Isolation Columns
5x M3 ESC Isolation Columns
1x 8 Pin single-ended cable for flight controller
2x 8 Pin Cable
1x 6 Pin Air Unit Cable
1x XT60

Download Quickstart Guide

Download Wiring Diagram

Weight 80 g

Reviews

There are no reviews yet.

Be the first to review “MAMBA MK4 F722 Mini F55_128K Flight Controller Stack”

Same Day Shipping

Mon-Sat til 3.00PM on Most orders

Provide Warranty

Seller & Manufacturer Warranty

Svg Vector Icons : http://www.onlinewebfonts.com/icon

Best Prices

Best Prices in India

Best Customer Support

Industry leading support

We are temporarily not accepting Orders

    There is nothing much we are happy than helping you out with the latest FPV gears, and offering top notch aftersales support. But we have stopped accepting orders till further notice due to ill-defined reasons. 

Thank you for all the support you have given us in the past. You are the reason why we are called India’s Premier and Finest FPV Store. So Don’t hold Back; We will be back in:

Days
Hours
Minutes
Seconds