Happymodel ExpressLRS EPW5 2.4GHz 5CH PWM Receiver

Happymodel ExpressLRS EPW5 2.4GHz 5CH PWM Receiver

Happymodel has released two receivers with PWM outputs for servos, designed to be used in the fixed wing aircrafts (and not only). EPW5 is the 5CH receiver for 2.4GHz. Both receivers can also be flashed with the firmware to output the CRSF protocol via RX/TX (PWM3/PWM2) pads

Out of stock


Orders placed before are shipped on same day

Out of stock


  • Item: Happymodel EPW5 2.4GHz pwm receiver
  • ESP8285, SX1280/1281
  • Antenna connector: IPEX MHF 1/U.FL
  • 5x PWM outputs
  • RF Frequency: 2.4GHz (2400~2480MHz)
  • Telemetry power: 12dbm
  • Receiver protocol: PWM or CRSF
  • Input voltage: +5V DC @ “+” pad
  • PCB size: 17mm x 14mm
  • Weight: 1.1g with antenna
  • Default firmware version: ExpressLRS v2.0


  • DIY_2400_RX_PWMP,  PWM receiver via 1~5 PWM outputs
  • HappyModel_EP_2400_RX,  CRSF Serial receiver via TX and RX
  • Firmware update via UART or WIFI


  • 1 x Happymodel EPW5 2.4GHz pwm Receiver
  • 2 x 2.4GHz antenna
  • 3 pin 2.54mm

Bind Procedure

  1. Supply power to the EPW5 RX, wait until the Green LED on the RX is off, immediately turn off the power, and then repeat again the above steps. When the RX is powered on for the third time, the Green LED light will start to double-flash, which means that the RX enters the binding mode
  2. Get into menu of ELRS.LUA V2.0 version from your radio transmitter and then press BIND, the Green LED on the RX module will getting to be solid if bind successfully.

Receiver LED status meanings
LED solid means bind successful or Connection established; LED double-flash means in bind mode; LED flash slowly means no signal connection from the TX module; LED flash fast means in WIFI hotspot mode, you can connect the WIFI of the RX and upgrade firmware of the RX via visit from the web browser(password: expresslrs)

Weight 30 g


There are no reviews yet.

Be the first to review “Happymodel ExpressLRS EPW5 2.4GHz 5CH PWM Receiver”

Same Day Shipping

Mon-Sat til 2.00PM on Most orders

Provide Warranty

Seller & Manufacturer Warranty

Svg Vector Icons : http://www.onlinewebfonts.com/icon

Best Prices

Best Prices in India

Best Customer Support

Industry leading support

You may also Like…

We are temporarily not accepting Orders

    There is nothing much we are happy than helping you out with the latest FPV gears, and offering top notch aftersales support. But we have stopped accepting orders till further notice due to ill-defined reasons. 

Thank you for all the support you have given us in the past. You are the reason why we are called India’s Premier and Finest FPV Store. So Don’t hold Back; We will be back in: