HOTA F6 is a four channel charger not only for 1-6S Lipo batteries. The charger is powered from the DC input via the XT60 connector with a voltage range of 10,5-30V. The charger can charge up to 250W per channel (1000W total). The charger can also be operated in synchronous mode, where two channels charge one battery with power up to 500W. In addition to the four main XT60 connectors for battery charging, the charger also has a USB-A 5V/2.1A connector and a USB-C connector with up to 45W output power. HOTA F6 is also equipped with a servo connector. It can send PWM/PPM signals, where it can serve as a servo tester or, conversely, receive and measure them, to verify the function of the RC receiver.

The charger supports all common cell types NiCd, NiMH, LiPo, Liion, LiHV and more.  Charging settings are made via swivel wheel and button. All charging information is clearly displayed on the color 2.8″ display. In addition to charging, the HOTA F6 can also discharge. Internal discharging is limited to 12W per channel. When using external load, discharge can be performed with up to 250W per channel;

Manual

Features

• Charge 4 batteries at once
• 2 USB charge ports
• USB-C charge port
• Servo Tester
• Color screen

Specifications

• Channels: 4
• Input Voltage: 10-30V DC
• Charge Current: 0.1-15A per channel (4)
• Discharge Current: 0.1-3A per channel (4)
• Battery Type: LiHv / LiPo / LiFe / Lilon / Lixx – 1-6s
• Balance Current: 1000mA per channel (4)
• USB-A Output: 5V 2.1A
• USB-C Output: 45W (Maximum)
• Dimensions: 115x121x46mm

Includes

• 1x HOTA F6 250W 15A 1-6S Quad Channel DC Smart Charger
• 1x Manual