The GEPRC MARK5 Pro Frame Kit is developed specifically for freestyle with squashed X arm design. Unique shock absorbing structure design, less vibrations and resonance, to provide a stable operating environment for the electronic system. Aluminum alloy side plates not only look stunning,but also reduce weight and add more endurance.
VIDEO: GepRC Mark5 Build EP1 : Frame Assembly
- Two different 3D printed parts bases, which can be installed with GoPro, Naked GoPro8, Insta 360 GO2 and Caddx Peanut cameras.
- The installation hole of VTX is compatible with DJI Air Unit and VISTA, while maintaining the 30.5*30.5 analog VTX installation hole.
- Specially designed independent capacitor and buzzer compartment for better performance and shaking reduction.
- Aluminum alloy side plates not only look stunning but reduce weight and add more endurance.
- Compatibile motor hole design supports the installation of 16x16mm and 19x19mm motors.
- Supports the installation of 19-20mm width lens,you can directly install DJI original lens.
- Unique shock-absorbing structure design, fewer vibrations, and resonance.
- MARK5 is the most ideal for freestyle flying and bando-bashing resistance.
- Developed specifically for freestyle with squashed X arm design.
- Squashed-X Configuration
- Black PRO Version
STRONG POWER SYSTEM
Strong power system, 16mm x 16mm / 19mm x 19mm motor holes will allow you to install larger 21-22-23-25 series motors, with a 5-inch propellers, with a strong power output.
30.5 X 30.5 FLIGHT CONTROLLER SUPPORT
MARK5 frame supports the mainstream 30.5mm x 30.5mm Flight Controller. Pre-set two sets of installation holes, Were 30.5mm x 30.5mm and 20mm x 20mm Fixing holes respectively. The subsidiary printing parts can also be directly installed with DJI Air Unit .
The MARK5 designed two different 3D printed mounts which can be installed with GoPro /Naked GoPro8/Insta 360 GO2 and Caddx Peanut cameras to record every moment of Freestyle.
The frame is compatible with DJI AIR UNIT, CADDX VISTA and Analog VTX.
- VTX Mounting Holes: 30.5mm x 30.5mm / 20mm x 20mm
- Motor Mounting Holes: 16mm x 16mm / 19mm x 19mm
- FC Mounting Holes: 30.5mm x 30.5mm
- Dimension: 214mm x 168mm x 42mm
- Camera Installation Space: 19-20mm
- Suitable Propeller Size: 5″propeller
- Motor to Motor Distance: 225mm
- Frame Configuration: Squashed-X
- Bottom Plate: 2.5mm
- Arm Plate: 5.0mm
- Top Plate: 2.5mm
- Weight: 130.0
- Version: Pro
- Color: Black
- 1x GEPRC Mark5 GEP-MK5 Bottom Plate
- 1x GEPRC Mark5 GEP-MK5 Mid Plate
- 1x GEPRC Mark5 GEP-MK5 Top Plate
- 4x GEPRC Mark5 GEP-MK5 5″ Arms
- 2x Action Camera Mount Holder
- 1x Antenna Fixed Tube
- 1x 3d Printed Part Set
- 2x Camera Plates
- 1x Allen Key Set
- 1x Hardware Kit
- 1x Standoff Set
- 2x Battery Pad
- 3x LiPo Straps
- 8x Dampers
- 1x Wrench